Thin 0.3mm Sheet Roll Forming Machine Metal Horizontal Round Wave

Thin sheet horizontal round wave making machine

Normally speaking, the round wave roofing sheets are made by the metal rolling forming machines. But for South African and some area, they would like to use some thin sheet like the thickness from 0.13 to 0.2mm to make the metal roofing sheets. Limited by the rolling forming machine characters, it cannot be made by rolling forming machine, as it will be torn into pieces.

Based on this need, barrel corrugated sheet rolling machine is developed based on the needs that thin sheet cannot be made to roof sheet by traditional roll forming machine. It can process material thickness from 0.15 to 0.30 mm and the roofing sheet length could be customized according to customer’s personal requirement. But limited by roll forming method, this machine needs to feed sheet and receive sheet by manual. ZTRFM has been dedicating to roll forming technologies for over 2 decades and now boasts strong experience, capabilities, innovative thinking and roll forming expertise to provide perfect roll forming solutions to our clients. At ZTRFM, we can help build a better future for you and your customer.

Using this type horizontal round wave making machine, first you need to cut the long coil into pieces, which the length is specified what you need. And then feeding coil to machine by pieces. Here is the machine picture for your reference:

When the profiles made by the horizontal round wave making machine, it will be cruved like the following:

Thin sheet horizontal round wave making machine parameters

1. .Roller station:2 sets
2. .Roller diameter:300mm,Material:45# steel
3. .Speed :15piece/min
4. .Weight:8.5T
5. .Voltage:380v,50hz,3ph
6. Motor: 11kw

When choose horizontal round wave making machine ?
1. When you want to make many types round wave,like different wave height and different wave distance.
2. When thickness between 0.13 to 0.25mm.

Why Choose Zhongtuo Horizontal round wave machine?

For different thickness, it is easy to adjust, we adopt turbocharger adjustment method, only need to adjust one side; Other, they use the normal handrail, acuracy and effectiveness will be lower

Common problem when using Horizontal round wave machine

1. The R angle is too small, and the arc feels shocking and unsightly
2. The wave crest is not right, and the arc length on both sides is different
3. Edge rebound
The smaller the side, the harder it is to press, the thinner the harder it is
How we solve it?
1. Enchance the shaft process hardness and accuracy.
2. Carefully processing gear.
3. Meanwhile if you like,we can also use the gearbox as transmission method, but price will be a little higher.

Horizontal machine needs thin sheet cut to length machine:

0.3mm Sheet Roll Forming Machine

Metal Roll Forming Machine 0.3mm

Horizontal Round Wave Metal Roll Forming Machine

Thin 0.3mm Sheet Roll Forming Machine Metal Horizontal Round Wave Images